A rifle scope is an optical device that is attached to a rifle in order to help the shooter aim at targets. The scope magnifies the image of the target, making it easier to hit.
There are many different types of rifle scopes on the market, each with its own set of features. However, all scopes share one common goal: to help you hit your target.
In order to use a rifle scope effectively, you need to know how to level it. This process is known as “zeroing” the scope, and it ensures that the crosshairs in the scope are lined up perfectly with where the bullets will impact.
Zeroing a scope is a relatively simple process, but it’s important to do it correctly. Follow these steps and you’ll be zeroed in no time!
Tools You Will Need
In order to level your rifle scope, you will need the following tools:
– A drill
– A set of Allen wrenches
– A Phillips head screwdriver
– A bubble leveler
– A piece of tape
– A pen or marker
Step 1: Remove the Rifle Scope from the Rifle
The first step is to remove the scope from the rifle. This will make it easier to work with and will prevent any damage to the scope or the rifle.
To remove the scope, start by loosening the screws that hold it in place. These screws are usually located on the top and bottom of the scope. Once the screws are loosened, you should be able to slide the scope off of the rifle.
Step 2: Attach the Scope Base
The next step is to attach the scope base. The scope base is a flat piece of metal that will provide a stable platform for attaching the scope.
There are typically two holes in the scope base, which line up with two holes in the receiver (the part of the rifle that the scope mounts to). Use a drill to create pilot holes in these four locations.
Once the pilot holes have been created, use a set of Allen wrenches to tighten bolts into each hole. Be sure to not overtighten the bolts, as this can strip the threads or damage the scope base.
Step 3: Attach the Rings
The next step is to attach the rings. The rings provide a place to mount the scope onto the scope base. There are typically two holes in each ring, which line up with two holes in the scope base.
Use a drill to create pilot holes in these four locations. Once the pilot holes have been created, use a set of Allen wrenches to tighten bolts into each hole. Be sure not to overtighten the bolts, as this can strip the threads or damage the rings.
Step 4: Mount the Scope onto the Rings
With the scope base and rings in place, it’s time to mount the scope. Start by sliding the scope onto the rings. The rings will hold the scope in place on the base.
Once the scope is in position, use a Phillips head screwdriver to tighten the screws that hold the scope in place. These screws are usually located on the top and bottom of the scope. Be sure not to overtighten the screws, as this can strip the threads or damage the scope.
Step 5: Level the Scope Base
The next step is to level the scope base. This ensures that the scope is mounted level on the rifle, which is important for accurate shooting.
To level the base, first find a level surface to work on. This could be a table, countertop, or other flat surface. Once you have found a level surface, place the bubble leveler on top of the scope base and adjust the base until the bubble is centered in the level.
Step 6: Level the Crosshairs
The next step is to level the crosshairs in the scope. This ensures that they are lined up perfectly with where the bullets will impact.
To do this, you will need to take a shot at a target. Set up a target at a distance of 100 yards (or meters) and get into a comfortable shooting position. When you’re ready, take a shot at the target.
Once you have taken the shot, take a look at where the bullet hit the target. If it is not in the center of the bullseye, you will need to adjust the scope.
To adjust the scope, start by loosening the screws that hold it in place. These screws are usually located on the top and bottom of the scope. Once these screws are loosened, you should be able to move the scope slightly to make adjustments.
For example, if the bullet hit low and to the left of the bullseye, you would need to adjust the scope up and to the right. Conversely, if the bullet hit high and to the right of the bullseye, you would need to adjust the scope down and to the left.
Make small adjustments until the crosshairs are lined up with where the bullets are hitting. Once you have made your adjustments, be sure to retighten the screws that hold the scope in place.
Step 7: Test Your Scope
The final step is to test your scope to ensure that it is properly mounted and calibrated. Set up a target at a distance of 100 yards (or meters) and get into a comfortable shooting position. When you’re ready, take a shot at the target.
Take a look at where the bullet hit the target. If it is reasonably close to the bullseye, then your scope is properly mounted and calibrated. However, if the bullet hits significantly off target, then you will need to make further adjustments to the scope.
If you are having trouble getting the scope mounted or calibrated, it is best to seek the help of a professional. They will be able to help you get your scope mounted and calibrated correctly.